finished the metal work on the headlight bracket, started with half inch square stock gave it some twisting and shouting, welded the 3/8 spacers to the end of the square stock and the headlight bolt mount was 2 pieces of angle, after couple hours of welding and grind work it turned into this creation!!!
made the sissy bar out of 1/2 inch round stock, started as a 10 foot piece, Joe ( captain cals pops) helped me out by doing the first bend at the local steel yard on his break so i can fit it in my 74 dodge dart. after couple measurement and making a jig on a plate of 1/4 inch steel i fired up the magical wand and made the bends
used another magical wand to cut out the mounting plates
No comments:
Post a Comment